3DPS logo
3DPS Europe
Service and development
News

News / article

New printers
← Back to news Back to homepage
AXILOOP MC8 and MC8 Pro: eight-toolhead printers on Kickstarter
2026. 11. 17.
731

AXILOOP MC8 and MC8 Pro: eight-toolhead printers on Kickstarter

2 min read

AXILOOP has launched the MC8 and MC8 Pro on Kickstarter, featuring eight separate toolheads, automatic calibration and claimed four-second tool changes.

AXILOOP has launched the MC8 and MC8 Pro on Kickstarter, featuring eight separate toolheads, automatic calibration and claimed four-second tool changes.

Eight materials, eight separate nozzles

The Kickstarter campaign launched on November 12, 2026, highlighting a broader move toward dedicated-head architectures in multicolor FFF printing. AXILOOP MC8 can keep eight materials loaded, each in its own toolhead. The manufacturer advertises approximately four-second exchanges while unused tools remain preheated.

Separate nozzles can reduce contamination and the purging associated with shared-nozzle color changes. However, managing eight heads adds calibration, thermal and maintenance challenges. Longer real-world prints will be needed to establish whether the campaign demonstrations reflect normal use.

Hardware and model differences

Both versions offer a 300 × 300 × 300 mm build volume. AXILOOP specifies up to 300 mm/s printing speed and 600 mm/s travel. The machine is described as having 2,500-point eddy-current bed probing, automatic tool-offset correction, a 1080p camera and 45 sensors. Maximum nozzle temperature is quoted as 300°C.

The open MC8 is aimed at PLA, PETG, TPU and PVA. The enclosed MC8 Pro adds active chamber heating, HEPA and activated-carbon filtration, with support claimed for ABS, ASA, PA, PC and fiber-filled polymers. Differences in bed adhesion and thermal expansion still matter when combining materials.

Crowdfunding conditions and risk

Announced Super Early Bird levels start at $1,099 for MC8 and $1,499 for MC8 Pro. AXILOOP targets March 2027 for first shipments, and the campaign is scheduled to run through December 27. These are pledge conditions, not ordinary in-stock retail prices; shipping, taxes and delivery schedules can change.

Alongside Quadro and Bambu H3C, 3DPS would focus on the repeatability of tool offsets, measured filament waste, firmware sustainability and spare-parts availability. The advertised results should not be mistaken for independent test measurements.

Sources and further information

Original manufacturer source image (AXILOOP): https://www.axiloop3d.com/素材/01.webp

Related articles
Archive

Earlier news

113 earlier article(s)
CXMT RAM: China Closes the Memory Gap from DDR5 to LPDDR6
Technology
2 166

CXMT RAM: China Closes the Memory Gap from DDR5 to LPDDR6

China’s ChangXin Memory Technologies (CXMT) is becoming a serious DRAM competitor: its DDR5 memory is appearing in desktop and server systems, while in September 2026 the company also announced mass production of LPDDR6.

2026. 09. 10.
Read
KPI features have been added.
Technology
2 098

KPI features have been added.

KPI features have been added. CALIBRA – Measurem Why do KPIs matter in measurement equipment management? Because data becomes truly useful only when it helps you see where attention is needed and how performance changes over time.

2026. 08. 24.
Read