Rear spiked threaded base
The largest component. It sits behind the tarp; conical spikes grip the material and the central internal thread receives the fastening nut.
Technical data
Three components, secure clamping
63 mmmaximum spiked-base diameter
56,5 mmupper clamping-plate diameter
16 mmnominal thread diameter
7 mmhex socket across flats
Construction
What is included?
Upper perforated clamping plate
It distributes clamping force on the outer face. Rope can pass through the central opening, while the smaller holes provide additional attachment options.
Threaded fastening nut
A flat scalloped hand wheel with a downward external thread. It can be tightened by hand and, when needed, with a 7 mm hex key.
Use
Quick to install
Create an opening in the tarp at the required position using heat or a suitable punch. Place the spiked base on one side and the clamping plate on the other, then tighten them together with the threaded nut. Rope can then be routed through the central opening.
- Can be hand-tightened without tools
- Can also be tightened with a 7 mm hex key
- Removable and reusable
- Weather-resistant PETG material
Applications
One fastener, many tarp applications
Trailers and cargo
For creating a new tie point or replacing a damaged factory eyelet.
Garden and pool covers
For stable, seasonally removable fastening of large covers and tarps.
Tents and temporary covers
As an additional tie point for wind loads or custom layouts.
Buy
Purchase area prepared
The product price is HUF 410 per unit. Cart, stock management, delivery and online payment will be configured in the next step.
FAQ
Frequently asked questions
What material is it made from?
It is made from weather-resistant PETG. Periodic inspection is recommended for long-term outdoor use.
Is it reusable?
Yes. The three-piece fastener can be disassembled and reused if the components are undamaged.
What tarp thickness is suitable?
It suits most general-purpose tarps, but testing is recommended on very thin, aged or brittle material.